Search for something Close search
Search by:

Found 91 results.

Development of a Robust Scrubber Level Controller: Phase 1

Griffin Beck, Carolyn Day - Southwest Research Institute

Wet Gas Formation and Carryover in Suction Equipment - Phase 2

Griffin Beck, Nathan Andrews - Southwest Research Institute

Guidelines for the Selection of Filtration Equipment - Phase I

Steven T. Green, Seth M. Nelson - Southwest Research Institute

A Method and Apparatus For Direct Enthalpy Rise Measurement For Gas Compression

Klaus Brun, Ph.D., Sarah B. Simons, Kelsi M. Katcher, Ryan A. Cater, Brandon L. Ridens - Southwest Research Institute

Dry Gas Seal Reliability: A Study of the Effects of Liquid Contamination on Seal Performance

Meera Day Towler, Timothy C. Allison, Ph.D., - Southwest Research Institute

Methane Reduction Data Analysis for 2-Stroke Lean Burn Natural Gas Engines

John Ladd, Mary Stevens, and Daniel B. Olsen, Colorado State University

Wet Gas Performance Testing of Reciprocating Compressors

Sarah Simons, Southwest Research Institute (SwRI); Klaus Brun, Ph.D., SwRI; Ryan Cater, SwRI

Review of Wet Gas Effects on Gas Machinery in the Oil & Gas Industry

Grant Musgrove, SwRI; Griffin Beck, SwRI; Melissa Poerner, SwRI

GMRC Project: Pipe Support Stiffness

Chris B. Harper, P.Eng.; Beta Machinery Analysis

GMRC Research Project: The Impact of Reciprocating Compressor Pulsations on the Surge Margin of Centrifugal Compressors

Klaus Brun, Ph.D., Southwest Research Institute (SwRI); Sarah Simons, SwRI; Benjamin White, SwRI

GMRC Research Project: Guideline for Calculation of Power Loss of Compressor Manifolds

Kelly Eberle, P.Eng.; Gordon Sun, P.Eng.; Beta Machinery Analysis

Flow through Piston Seals in Lubricated Reciprocating Gas Compressors

Dr. Stephen Boedo; Professor; Department of Mechanical Engineering; Rochester Institute of Technology

Predicting the Power Loss of Reciprocating Compressor Manifolds GMRC Research Project

Kelly N Eberle, B.Sc., P.Eng. Beta Machinery; Kamal Botros, Ph.D., P.Eng.

Pipe Support Stiffness

Chris B. Harper, Beta Machinery Analysis